The magnetic levitation atomizer consists of an atomizer shell, magnetic levitation high-speed motor, liquid distribution plate, liquid spraying plate, and other parts. The magnetic levitation high-speed motor is a high-precision medium frequency motor, and its speed is directly determined by the pole pairs of the motor and the input AC frequency. The liquid spraying plate is installed on the front spindle of the high-speed motor and rotates together with the motor. The liquid enters the high-speed rotating atomizing disc through the liquid distribution plate. Under the rated output reproduction state of the high-speed motor, its speed variation rate is less than 4%. With the corresponding high-performance variable frequency power supply, it can achieve stepless speed regulation within the allowable speed range of the motor, meeting the drying and atomization requirements of different materials.

Performance features
Stepless speed adjustment
The magnetic levitation high-speed motor directly drives the atomizer without the need for complex gear speed-up transmission. The energy consumption is 1/2 to 1/3 of the gear speed-up method, and the input power can be adjusted according to the spray load conditions. After using frequency conversion speed regulation technology, the speed can be continuously adjusted to select the optimal speed according to the characteristics of the dried material.

Low energy consumption
The magnetic levitation atomizer adopts a direct drive structure of the high-speed motor and magnetic levitation bearing technology, with a transmission efficiency close to 100%, no contact, no friction, low vibration, uniform atomization, and low noise. The efficiency is increased by 10-30%.

No performance degradation
The magnetic levitation atomizer does not experience performance degradation throughout its entire life cycle, self-adjusts power with load, significantly saves energy, has low temperature rise, and stable performance.

Low noise and environmental protection
It operates with low noise, completely free of friction, and no gear teeth meshing.

Simple operation
It has a compact structure, small size, light weight, and is easy to install, operate, clean, and maintain.

Multi-level protection
The composite type electric spray head uses both water cooling and air cooling, and can be lubricated with grease or oil as needed. It is more suitable for operation in high-temperature environments and has functions such as water cutoff, air cutoff, over-current, and over-temperature alarms, which is stable and reliable.

Model parameters 

Application Fields